This monitor can be attached to a wall mounting arm you purchase separately. Preparing to Install An Optional Wall Mounting Arm. To protect equipment, always turn off the PC and LCD monitor before connecting Wall Mounting If it does not display an image, please refer Troubleshooting. If your monitor displays an image, installation is complete. Plug the power cord of your computer and your display into a nearby outlet.Connect the display signal cable to the video connector on the back of your computer.Turn off your computer and unplug its power cable.Connect the power cord to the back of the display firmly.Connecting the MonitorĬable Connections In Back of Monitor and Computer: It may cause damage or break the LCD screen. You are able to adjust the monitor as below:ĭo not touch the LCD screen when you change the angle. Hold the stand so you will not topple the monitor when you change the monitor’s angle. Please setup or remove the base following the steps as below.įor optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Please check with the local dealer or AOC branch office for confirmation Setup Stand & Base * Not all signal cables will be provided for all countries and regions. Make sure that the ventilating openings are not blocked by a table or curtain.ĭo not engage the LCD monitor in severe vibration or high impact conditions during operation.ĭo not knock or drop the monitor during operation or transportation Setup Contents in Box If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Please disconnect the power cord before cleaning the product. The cleaning cloth should not be too rough as it will scratch the screen surface. When cleaning, make sure no detergent is leaked into the product. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:Ĭlean the cabinet regularly with cloth. Otherwise, air circulation may be inadequate hence overheating may cause a fire or damage to the monitor. Leave some space around the monitor as shown below. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. Never spill liquids on the monitor.ĭo not place the front of the product on the floor. It could damage circuit parts causing a fire or electric shock. Never push any object into the slot on the monitor cabinet. A product and cart combination should be moved with care. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. If the monitor falls, it can injure a person and cause serious damage to this product. Installationĭo not place the monitor on an unstable cart, stand, tripod, bracket, or table. The wall socket shall be installed near the equipment and shall be easily accessible. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. Overloading can result in fire or electric shock. This will protect the monitor from damage due to power surges.ĭo not overload power strips and extension cords. Unplug the unit during a lightning storm or when it will not be used for long periods of time. Do not defeat the safety purpose of the grounded plug. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. This plug will fit only into a grounded power outlet as a safety feature. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor should be operated only from the type of power source indicated on the label.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |